EasyManuals Logo
Home>Sharp>TV>LC-19A33X-BK

Sharp LC-19A33X-BK User Manual

Sharp LC-19A33X-BK
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
39
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Setup”.
2
Press
a
/
b
to select “Fine Sync.”, and then
press ENTER.
4
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimise the image.
Press
a
/
b
to select a specifi c adjustment
item among “H-Position”, “V-Position”, “Clock”
and “Phase”.
5
Reset
H-Position [ 90] ab
ab
ab
ab
V-Position
Clock
Phase
[ 60]
[ 90]
[ 8]
Press
c
/
d
to adjust the item to your desired
position.
6
NOTE
For resetting all adjustment items to the factory preset
values, press
a
/
b
to select “Reset”, and then press
ENTER.
Images may not be displayed properly depending on the
settings and/or input signals.
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Setup”.
2
This function enables the screen to be automatically
adjusted to its best possible condition when the
analogue terminals of the TV and PC are connected
with a commercially available RGB cable, etc.
Selected item Description
H-Position Centres the image by moving it to the left
or right.
V-Position Centres the image by moving it up or
down.
Clock Adjusts when the image fl ickers with
vertical stripes.
Phase Adjusts when characters have low
contrast or when the image fl ickers.
Adjusting the PC image automatically Adjusting the PC image manually
Connecting a PC
Press
a
/
b
to select “Yes”, and then press
ENTER.
Auto Sync. starts.
5
NOTE
Auto Sync. is likely to succeed when an input PC image
has wide vertical stripes (e.g. pattern with high contrast
stripes, or cross-hatched).
It may fail when an input PC image is solid (low contrast).
Be sure to connect the PC to the TV and switch it on
before starting Auto Sync.
Press
a
/
b
to select “PC Setup”, and then
press ENTER.
3
Press
a
/
b
to select “Auto Sync.”, and then
press ENTER.
4
Press
a
/
b
to select “PC Setup”, and then
press ENTER.
3
MENU
[
Setup
...
PC Setup
]
Ye s
No
Input Signal
Auto Sync.
Fine Sync.
19A33X_en_f.indd 3919A33X_en_f.indd 39 2007/07/23 18:24:402007/07/23 18:24:40

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp LC-19A33X-BK and is the answer not in the manual?

Sharp LC-19A33X-BK Specifications

General IconGeneral
BrandSharp
ModelLC-19A33X-BK
CategoryTV
LanguageEnglish

Related product manuals