Watching TV
Selecting language audio
E DTV/CADTV mode:
Pressing 2 appear a menu with languages or
audio sources availables depending on the received
broadcast.
Press a/b to select the language and press OK.
NOTE
• The audio mode screen disappears in three seconds.
• Selectable items vary depending on the received
broadcasts.
E ATV mode:
Each time you press 2, the mode switches as
shown in the following tables.
NICAM TV broadcasts selection
Signal Selectable items
Stereo
NICAM STEREO, MONO
Bilingual
NICAM CH A, NICAM CH B, NICAM CH AB, MONO
Monaural
NICAM MONO, MONO
A2 TV broadcasts selection
Signal Selectable items
Stereo
STEREO, MONO
Bilingual
CH A, CH B, CH AB
Monaural
MONO
NOTE
• When no signal is received, the audio mode will display
“MONO”.
E DTV/CADTV mode: Press SUBTITLES [
button to access “SUBTITLE LANGUAGES”.
E ATV mode: The available subtitles according to
the broadcasting will be enabled or disabled by
pressing the SUBTITLES
[ key.
E Press “DTV” to change between ATV↔DTV
or ATV↔CADTV mode.
Daily operation
Switching on/off
Turning on/off the power
Press a on the TV to switch it on.
Switch it off by pressing a on the TV.
Standby mode
E Switching to standby mode
If the TV is switched on (BLUE LED), you can switch it
to standby by pressing B on the remote control unit.
E Switching on from standby
From standby (RED LED), press B on the remote
control unit.
TV indicator status
B indicator
Status
Off
Power off
Blue
Power on
Red
Standby
Violet
StandBy with USB REC programmed
NOTE
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• A small amount of electric power is still consumed even
when a is turned off.
Switching between analogue and
digital broadcasts
Changing channels
With 0–9:
With Pr/s:
Selecting an external video source
Once the connection is made,
press b to display the
“INPUT SOURCE” screen,
and then press a/b to
switch over to the appropriate
external source with OK.
Switching subtitle languages
10
NOTE
• When turning off the power using
a on the TV, EPG data will be lost.
• The terminal layout may differ
depending on the model.
To Next Page
Loading...
Need help?
General