EasyManuals Logo

Sharp LC-24LE240E User Manual

Sharp LC-24LE240E
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
English - 31 -
Note: If the Country option is set to France, you can
use 4725 as the default code.
After you enter the pin, a pop-up menu appears on
the screen to ensure that the hard disk should be
formatted, select “YES” and press OK to format the
hard disk. Select “NO” and press OK to cancel. Ensure
you back up important recordings before you format
the USB disk unit.
Hard Disk Info
To view the details about the USB disk, highlight Hard
Disk Info by using “
” or “ ” key and press OK. USB
disk information will be displayed:
Con guring Date/Time Settings
Select Date/Time in the Settings menu to con gure
Date/Time settings. Press OK button.
Use “ ” or “ ” buttons to highlight Date/Time.
Date,Time,Time Settings Mode and Time Zone Setting
will be available.
Use “
” or “ ” buttons to highlight the Time Settings
Mode. Time Settings Mode is set using “ ” or “
buttons. It can be set to AUTO or MANUAL.
When AUTO is selected, Date/Time and Time Zone
options will not be available to be set. If MANUAL option
is selected as the Time Zone can be altered:
• By pressing “
” or “ ” buttons select Time Zone.
Use “
” or “ ” buttons to change the Time Zone
between GMT-12 or GMT+12. Date/Time on the top of
the menu list will then change according to the selected
Time Zone.
If you have selected Country option in the First Time
Installation as Netherlands, Date/Time Settings will not
be available to be changed.
Changes are automatically stored. Press “MENU”
to exit.
Con guring Source Settings
You can enables or disable selected source options. The
TV will not switch to the disabled source options when
“SOURCE” button is pressed.
Select Sources in the Settings menu and press OK
button.
Press“
” or “ ” buttons to select a source.
Use “
” or “ ” button to enable or disable the
selected source. Changes are automatically
stored.
Con guring Other Settings
To view general con guration preferences, select Other
Settings in the Settings menu and press OK button.
Operation
Press “ ” or “ ” buttons to select an item.
Use “
” or “ ” button to set an option.
Press OK button to view a sub-menu.
A01_MB62_[GB]_1910UK_IDTV_TC_PVR_BRONZE19_24942LED_ROCKER_ZIGGO_10077476_50211339.indd 31A01_MB62_[GB]_1910UK_IDTV_TC_PVR_BRONZE19_24942LED_ROCKER_ZIGGO_10077476_50211339.indd 31 15.03.2012 16:27:3215.03.2012 16:27:32

Table of Contents

Other manuals for Sharp LC-24LE240E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp LC-24LE240E and is the answer not in the manual?

Sharp LC-24LE240E Specifications

General IconGeneral
Response time8 ms
Display diagonal24 \
Display brightness250 cd/m²
Native aspect ratio16:9
LED backlighting typeEdge-LED
Supported video modes1080p
Contrast ratio (dynamic)30000:1
Display diagonal (metric)60 cm
Supported graphics resolutions1920 x 1080 (HD 1080)
3DNo
Number of AV connections1
Annual energy consumption28 kWh
Product colorBlack
Mercury content0 mg
Panel mounting interface75 x 75 mm
Tuner typeAnalog & digital
Analog signal format systemNTSC, PAL, SECAM
Digital signal format systemDVB-T
RMS rated power5 W
Number of speakers2
HDMI version1.3
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity0
Video formats supportedDIVX, H.264, MPEG4
Power consumption (off)0.01 W
Power consumption (standby)0.5 W
Power consumption (typical)19 W
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)149 mm
Height (with stand)405 mm
Weight (with stand)5200 g
Depth (without stand)36 mm
Width (without stand)580 mm
Height (without stand)380 mm

Related product manuals