Name: Sharp LC-24LE240E
Brand: Sharp
Rating: 5 (1 reviews)

To Next Page

To Previous Page

English - 41 -

Installing the Stand

1. Sharp Television

2. Stand Cover

3. Stand

IMPORTANT

Please read the following information carefully before attaching the stand to your new Sharp Television.

Installing the Stand

! Before fitting the stand, ensure that the TV is unplugged from its power source.

! Place the Sharp Television (1) on a soft, stable and flat surface, facing down.

! Place the Stand (3) on the stand mounting pattern on the rear side of the TV.

Ensure the Stand (3) is placed correctly and that you can see the screw holes on the back of the Sharp Television.

! Place the Stand Cover (2) on the Stand (3).

! Ensure the Stand Cover (3) is placed correctly and that you can see the screw holes on the back of the Sharp Television.

! DO NOT insert the screws before placing the plastic molding.

! Insert the four screws provided and tighten them gently until the stand is properly fitted.

A01_MB62_[GB]_1910UK_IDTV_TC_PVR_BRONZE19_24942LED_ROCKER_ZIGGO_10077476_50211339.indd 41A01_MB62_[GB]_1910UK_IDTV_TC_PVR_BRONZE19_24942LED_ROCKER_ZIGGO_10077476_50211339.indd 41 15.03.2012 16:27:4015.03.2012 16:27:40

Other manuals for Sharp LC-24LE240E

Service Manual84 pages

Questions and Answers:

Need help?

Do you have a question about the Sharp LC-24LE240E and is the answer not in the manual?

Sharp LC-24LE240E Specifications

General

Response time	8 ms
Display diagonal	24 \
Display brightness	250 cd/m²
Native aspect ratio	16:9
LED backlighting type	Edge-LED
Supported video modes	1080p
Contrast ratio (dynamic)	30000:1
Display diagonal (metric)	60 cm
Supported graphics resolutions	1920 x 1080 (HD 1080)
3D	No
Number of AV connections	1
Annual energy consumption	28 kWh
Product color	Black
Mercury content	0 mg
Panel mounting interface	75 x 75 mm
Tuner type	Analog & digital
Analog signal format system	NTSC, PAL, SECAM
Digital signal format system	DVB-T
RMS rated power	5 W
Number of speakers	2
HDMI version	1.3
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	0
Video formats supported	DIVX, H.264, MPEG4
Power consumption (off)	0.01 W
Power consumption (standby)	0.5 W
Power consumption (typical)	19 W

Weight and Dimensions

Depth (with stand)	149 mm
Height (with stand)	405 mm
Weight (with stand)	5200 g
Depth (without stand)	36 mm
Width (without stand)	580 mm
Height (without stand)	380 mm