8
QUICK INSTALLATION TIPS
1. Attach your antenna to the back of the TV/DVD.
(See page 13.)
2.
Connect the AC plug for the TV/DVD into the wall outlet.
• Place the TV/DVD close to the AC outlet, and keep the
power plug within reach.
NOTE
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
3.
Bundle the cords properly with a cable clamp.
STOP! To safely remove the television from the box
• It’s best to use 2 people to remove the television for stability.
• Lift onto installation location as the diagram illustrates.
Ventilation & Cleaning Tips
Keep your TV/DVD in a well ventilated area and make sure not to place it by a heat source or use near water.
The TV/DVD is designed for AC use only and should be used with supplied AC cord.
Clean the screen by spraying a soft lint free cloth (supplied) with water to lightly moisten.
Gently wipe and avoid pressing on the screen. To clean the outer cabinet, use the same
method.
Do not use liquid or aerosol cleaners.
The screen is glass and can be scratched or broken when dropped or impacted.
4.
How to turn on the TV/DVD for the first time.
A) Press POWER on TV/DVD.
B) POWER indicator on the front of the TV/DVD lights
GREEN.
NOTE
• Speaker cannot be detached from the TV/DVD.
• TV/DVD angle cannot be adjusted.
AC outlet
QUICK REFERENCE
POWER
POWER indicator
To Next Page
Loading...
Need help?
General
