Sharp LC-32LB591U User Manual

19
LC-32LB591U / LC-32LB591C 32" HD LED 720p Sharp Roku TV
Coaxial (good)
1 Make sure that your TV’s power cord is unplugged and all connected devices are turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the left side of your TV and to the coaxial out jack
on the cable or satellite box.
4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 On the Home screen, press or to highlight the AntennaTV tile, then press OK. If you have not set up the TV
tuner, follow the on-screeen instructions.
Notes
• Use a coaxial cable to eliminate interference and noise from radio
waves.
• Do not bundle the coaxial cable with the power cord or other cables.
Cable or
satellite box
Coaxial
cable
Left side of
TV
Coaxial cable
connector
ANT/CABLE IN
jack
On your TV
Cable
wall jack

Sharp LC-32LB591U Specifications

General

Screen Type	led
Wall Mount	200mm x 200mm
Tuner	digital
Screen Size	31.5 inches, 32 inches
Refresh Rate	60hz
Closed Captioning	yes
HDR	no
Built-In Speakers	yes
Surround Sound	dts trusurround
Speakers Output	5 watts
USB Ports	1
Ethernet	no
RF Antenna	yes
Network	built-in wi-fi
Headphones Output	yes
Digital Optical Audio Outputs	0
Analog Audio Outputs	1
Component Video Inputs	0
Composite Video Inputs	1
DVI	0
VGA Ports	0
SmartTV	roku tv
Remote Control	standard
3D	no
Power Consumption	83 kilowatt hours
Depth with Stand	6.8 inches
Height with Stand	18.6 inches
Width with Stand	29.2 inches
Net Weight with Stand	11 pounds
Depth without Stand	3.6 inches
Height without Stand	17.4 inches
Net Weight without Stand	10.8 pounds