Sharp LC-32LB591U User Manual

34
LC-32LB591U / LC-32LB591C 32" HD LED 720p Sharp Roku TV
Installing remote control batteries
Open the back of your TV remote control and insert two AAA batteries, observing the proper orientation. Reattach the back
cover.
Remote control on page 14 explains how to use the remote control in each of your TV’s operating modes.
Aiming the remote control
• Point the remote control towards the remote sensor on the front of your TV.
Cautions
• Batteries should not be exposed to excessive heat, such as sunshine,
heat registers, or fire.
• Battery chemicals can cause a rash. If the batteries leak, clean the
battery compartment with a cloth. If chemicals touch your skin, wash
immediately.
• Make sure that batteries are disposed of correctly. Do not burn or
incinerate.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• If the remote control is not going to be used for an extended period of
time, remove the batteries.

Sharp LC-32LB591U Specifications

General

Screen Type	led
Wall Mount	200mm x 200mm
Tuner	digital
Screen Size	31.5 inches, 32 inches
Refresh Rate	60hz
Closed Captioning	yes
HDR	no
Built-In Speakers	yes
Surround Sound	dts trusurround
Speakers Output	5 watts
USB Ports	1
Ethernet	no
RF Antenna	yes
Network	built-in wi-fi
Headphones Output	yes
Digital Optical Audio Outputs	0
Analog Audio Outputs	1
Component Video Inputs	0
Composite Video Inputs	1
DVI	0
VGA Ports	0
SmartTV	roku tv
Remote Control	standard
3D	no
Power Consumption	83 kilowatt hours
Depth with Stand	6.8 inches
Height with Stand	18.6 inches
Width with Stand	29.2 inches
Net Weight with Stand	11 pounds
Depth without Stand	3.6 inches
Height without Stand	17.4 inches
Net Weight without Stand	10.8 pounds