Sharp LC-32LB591U User Manual

21
LC-32LB591U / LC-32LB591C 32" HD LED 720p Sharp Roku TV
Connecting a DVD or Blu-ray player
Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see What connection should I use? on page 16.
You can connect a DVD or Blu-ray player using:
•HDMI® (best)
•AV (good)
HDMI
®
(best)
1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI® cable (not provided) to an HDMI jack on the left side of your TV and to the HDMI OUT jack on the
DVD or Blu-ray player.
3 Plug your TV’s power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
4 On the Home screen, press or to highlight the HDMI 1, HDMI 2, or HDMI 3 tile, then press OK.
Note
For better picture quality, we recommend that you use cables designated as
High Speed HDMI® cables.
Note
An HDMI® cable carries both audio and video. You do not need to use any
audio cables.
Left side
of TV
HDMI® cable
DVD or Blu-ray player
HDMI® cable
connector
HDMI® jack
On your TV

Sharp LC-32LB591U Specifications

General

Screen Type	led
Wall Mount	200mm x 200mm
Tuner	digital
Screen Size	31.5 inches, 32 inches
Refresh Rate	60hz
Closed Captioning	yes
HDR	no
Built-In Speakers	yes
Surround Sound	dts trusurround
Speakers Output	5 watts
USB Ports	1
Ethernet	no
RF Antenna	yes
Network	built-in wi-fi
Headphones Output	yes
Digital Optical Audio Outputs	0
Analog Audio Outputs	1
Component Video Inputs	0
Composite Video Inputs	1
DVI	0
VGA Ports	0
SmartTV	roku tv
Remote Control	standard
3D	no
Power Consumption	83 kilowatt hours
Depth with Stand	6.8 inches
Height with Stand	18.6 inches
Width with Stand	29.2 inches
Net Weight with Stand	11 pounds
Depth without Stand	3.6 inches
Height without Stand	17.4 inches
Net Weight without Stand	10.8 pounds