Sharp LC-32LB591U User Manual

31
LC-32LB591U / LC-32LB591C 32" HD LED 720p Sharp Roku TV
Analog audio using the LINE OUT jack
When you connect an analog speaker system or soundbar to the LINE OUT jack, sound plays through the TV speakers and
the audio device.
1 Make sure that your TV’s power cord is unplugged and the analog speaker system or soundbar is turned off.
2 Connect an audio cable (not provided) to the LINE OUT jack on the right side of your TV and to the AUDIO IN jacks on
the analog speaker system or soundbar.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the analog speaker system or soundbar, then set it to the correct source. For more information, see the
documentation that came with the analog speaker system or soundbar.
Note
Use the volume controls on the analog speaker system or soundbar to
control the volume.
Audio cable
Analog speaker system
Right side
of TV
Audio cable
connector
LINE OUT jack
On your TV
Soundbar

Sharp LC-32LB591U Specifications

General

Screen Type	led
Wall Mount	200mm x 200mm
Tuner	digital
Screen Size	31.5 inches, 32 inches
Refresh Rate	60hz
Closed Captioning	yes
HDR	no
Built-In Speakers	yes
Surround Sound	dts trusurround
Speakers Output	5 watts
USB Ports	1
Ethernet	no
RF Antenna	yes
Network	built-in wi-fi
Headphones Output	yes
Digital Optical Audio Outputs	0
Analog Audio Outputs	1
Component Video Inputs	0
Composite Video Inputs	1
DVI	0
VGA Ports	0
SmartTV	roku tv
Remote Control	standard
3D	no
Power Consumption	83 kilowatt hours
Depth with Stand	6.8 inches
Height with Stand	18.6 inches
Width with Stand	29.2 inches
Net Weight with Stand	11 pounds
Depth without Stand	3.6 inches
Height without Stand	17.4 inches
Net Weight without Stand	10.8 pounds