24
LC-32LE225
Page Line Sub
Page
Item Description Remarks (adjustment details, etc.)
01/17 [SHARP FACTORY MENU
ADC ADJUST (continued)
ADC ADJUST Submenu Press “OK” to enter to ADC ADJUST Submenu
10 13/17 B-GAIN 80 Press “◄” or “►” for manual adjustment.
R-OFFSET 128 Press “◄” or “►” for manual adjustment.
G-OFFSET 128 Press “◄” or “►” for manual adjustment.
B-OFFSET 128 Press “◄” or “►” for manual adjustment.
AUTO ADC
“SUCCESS” or ”Fail will be displayed
Press “◄” or “►” for automatic adjustment in each mode.
11 GAMMA (1/3) GAMMA Submenu Press “OK” to enter to GAMMA Submenu
14/17 MGAMMA IN1 40 W/B adjustment, gradation 1 input setting.
MGAMMA IN2 80 W/B adjustment, gradation 2 input setting.
MGAMMA IN3 120 W/B adjustment, gradation 3 input setting.
MGAMMA IN4 160 W/B adjustment, gradation 4 input setting.
MGAMMA IN5 200 W/B adjustment, gradation 5 input setting.
MGAMMA IN6 240 W/B adjustment, gradation 6 input setting.
MGAMMA WRITE
“SUCCESS” will be displayed
Press “◄” or “►” for EEP writing of adjustment values.
MGAMMA RESET
“SUCCESS” will be displayed
Press “◄” or “►” for Initialization of adjustment values.
GAMMA (2/3) GAMMA Submenu
15/17 MGAMMA R1 151 W/B adjustment, gradation 1R adjustment value.
MGAMMA G1 155 W/B adjustment, gradation 1G adjustment value.
MGAMMA B1 146 W/B adjustment, gradation 1B adjustment value.
MGAMMA R2 307 W/B adjustment, gradation 2R adjustment value.
MGAMMA G2 318 W/B adjustment, gradation 2G adjustment value.
MGAMMA B2 308 W/B adjustment, gradation 2B adjustment value.
MGAMMA R3 458 W/B adjustment, gradation 3R adjustment value.
MGAMMA G3 480 W/B adjustment, gradation 3G adjustment value.
MGAMMA B3 471 W/B adjustment, gradation 3R adjustment value.
MGAMMA WRITE
“SUCCESS” will be displayed
Press “◄” or “►” for EEP writing of adjustment values.
GAMMA (3/3) W/B ADJUST Submenu
16/17 MGAMMA R4 619 W/B adjustment, gradation 4R adjustment value.
MGAMMA G4 640 W/B adjustment, gradation 4G adjustment value.
MGAMMA B4 631 W/B adjustment, gradation 4B adjustment value.
MGAMMA R5 770 W/B adjustment, gradation 5R adjustment value.
MGAMMA G5 800 W/B adjustment, gradation 5G adjustment value.
MGAMMA B5 789 W/B adjustment, gradation 5B adjustment value.
MGAMMA R6 918 W/B adjustment, gradation 6R adjustment value.
MGAMMA G6 961 W/B adjustment, gradation 6G adjustment value.
MGAMMA B6 946 W/B adjustment, gradation 6R adjustment value.
MGAMMA WRITE
“SUCCESS” will be displayed
Press “◄” or “►” for EEP writing of adjustment values.
12
SYSTEM INFORMATION
SYSTEM INFORMATION
Submenu
Press “OK” to enter to SYSTEM INFORMATION Sub-
menu (Only for Engineering purpose, don’t use)
17/17 NOISE LEVEL 8 Informative (changing).
GLOBAL MOTION 127 Informative (changing).
BIT RATE 0 Informative.
Scan name search 2 Changeable between 0 and 255.
VPS code FFFF Informative.
830/1 code FFFF Informative.
830/2 code FFFF Informative.
Top TXT enabled 1 Press “◄” or “►” to change 0/1.
CEC off Press “◄” or “►” to change off/on.
To Next Page
Loading...
Need help?
General