32
LC-32LE225
2. LE225 Connected TV Unit Software Updating
2.1. USB method:
2.1.1. Insert a USB fl ash memory on the USB Wi-Fi terminal including the “upgrade.mbu” fi le.
2.1.2. Enters on “Settings”, “General” (Blue on remote) and “Check”.
2.1.3. After few seconds the OSD indicates if the upgrade is possible or not. Please confi rm or cancel the up-
grade process.
2.1.4. In case of the USB was not inserted or the software was not matching with this model, the “No valid up-
grade fi le found at fi le:usb0:/upgrade.mbu” message appears on the screen.
2.1.5. Please do not turn-off or disconnect the TV set whilst upgrade was in progress.
Software Updating (Continued)
To Next Page
Loading...
Need help?
General