33
LC-32LE225
2.1.6. During the upgrading process, the connected TV Module will reboot automatically. The new software ver-
sion can be checked on the SHARP AquosNet splash screen, but please do not turn-off until Oregan media
Browser was displayed and disappears the logo “Loading”
2.2. INTERNET method:
The Connected TV module tries to be upgraded automatically every time the TV set is switch-on and the network
is available. In case of newer software than the currently installed on the module was available, the user will be
prompted “There are updates available for download, do you wish to upgrade?”
User can execute the upgrade by pressing “OK” on remote or cancel it. The rest of the process is same as the
USB method explained before; please follow from item 2.1.5.
To Next Page
Loading...
