Sharp LC-32LE551U - Remote Control Unit

Part Names
1 INPUT: Select a TV input source. (See page 24 SLEEP: Set a time when the TM auiomatically
9.) switches to standby, (See page 23,)
2 0-9: Set the channel,
3 ENT: Jump to a channel after selecting with
the 0--9 buttons.
4 FLASHBACK: Press to switch to the previously
tuned channel or external input mode, Press
a,gain to switch back to the currently tuned
channel or external input mode,
5 AUDIO: Select the sound mode, (See page
15,)
6 MUTE: Mute the sound,
7 CH A/V: Select the channel,
8 MENU: Display the menu screen, (See page
17.)
9 ,_/Y/_I/I_, ENTER: Select a desired item on
the screen,
10 RETURN: Return to the previous menu screen,
11 FAVORITE CH: Select to view the preset
favorite channels, While watching, you can
toggle the selected channels by pressing A, B,
C and D.
12 AV MODE: Select the picture mode. (See page
19.)
13 VIEW MODE: Select the aspect ratio, (See
page 16,)
14 {_ r_}: Only for USB,
15 POWER: Switch the power on or enters
standby mode. (See page 12,)
16 • (DOT): (See page 14,)
17 DISPLAY: Display the current channel (or input
source) information on the screen,
18 FREEZE: Set the still image, Press again to
return to normal screen,
19 VOL+/- : Set the volume. (See page 14.)
20 SURROUND: Direct select the surround
setting: "Movie", "News" or "Off". (See page
20,)
21 TV: Direct switch TM source.
25 CO: Select the closed caption mode. (See page
23.)
22 USB: Direct switch USB source.
23 EXIT: Turn off the menu screen,
• When using the remote control unit, point it at the TV.
_-8