LC-32M400M-BK/WH/RD
5 – 2
6) Let the process running & entering verification.
7) Software is successfully installed when the following appears at the end of the process.
8) Plug off the LCD TV and plug ON again as usual.
9) LCD TV is running with the latest software.
4. Signal adjustment
4.1. Signal check
Confirmation of signal from generator (setting to spec level)
4.1.1 PROCESS MODE
• PAL Composite signal : 0.7Vp-p ± 0.02Vp-p (Pedestal to white level)
• 15K Component signal (50Hz) : Y level:
Pb, Pr level:
0.7Vp-p ± 0.02Vp-p (Pedestal to white level)
0.7Vp-p ± 0.02Vp-p
• 33K component signal : Y level:
Pb, Pr level:
0.7Vp-p ± 0.02Vp-p (Pedestal to white level)
0.7Vp-p ± 0.02Vp-Com
Adjustment item Adjustment conditions Adjustment procedure
1 Adjustment mode 1) Press the test key at the test remote control.
Verifying
Verified
Please re-boot the system
Update Finished
To Next Page
Loading...
