Sharp LC-40LE265T - Signal Adjustment Procedures (LC-32 LE265 T); Component 33 K 60 Hz and PC RGB Adjustment

LC-32LE265T / LC-40LE265T
3 – 14
(3) Component 33K 60Hz Signal Adjustment (COMP-HD)
ERUDECORP NOITIDNOC METI
1 Setting [Signal]
COMP 33K 60Hz
(1080i)
100% Full-field
Colour Bar
[Terminal]
COMPONENT
INPUT 4
ί
Feed the COMPONENT 33K 60Hz (1080i) 100% Full-field
Colour Bar signal(100% colour saturation) to
COMPONENT INPUT4
2 Auto Adjustment Test Mode page 5
(COMP HD)
At the related page, move cursor to [COMP HD ADJ], press
ENTER.
[OK] appears when finished.
(4) PC (ANALOG RGB) Signal Adjustment (PC-RGB)
NO. ERUDECORP NOITIDNOC METI
1 Setting [Signal]
XGA 60Hz
100% Checkered
Pattern
[Terminal]
PC INPUT 6
ί
Feed the XGA 60Hz 100% Checkered pattern
signal(100% colour saturation) to PC INPUT
䯲
Please make sure SYNC is OFF.
2 Auto Adjustment Test Mode page 6
(PC-RGB)
At the related page, move cursor to [RGB ADJ], press
ENTER.
[OK] appears when finished.
100% WhiteėĕBlack