Sharp LC-43LB601U - Connecting a Computer

26
LC-43LB601U / LC-50LB601U / LC-43LB601C / LC-50LB601C
43" / 50" Full HD LED 1080p Sharp Roku TV
Connecting a computer
You can use an HDMI® jack on your TV to connect to a computer.
1 Make sure that your TV’s power cord is unplugged and the computer is turned off.
2 Connect an HDMI® cable (not provided) to an HDMI jack on the side or back of your TV and to the HDMI OUT jack on the
computer.
3 Plug your TV’s power cord into a power outlet, then turn on your TV and the computer.
4 On the Home screen, press or to highlight the HDMI 1, HDMI 2, or HDMI 3 tile, then press OK.
5 Adjust the display properties on the computer, if necessary.
Note
For better picture quality, we recommend that you use cables designated as
High Speed HDMI® cables.
RESET
RESET
HDMI3
USB
USB
DIGITAL
OPTICAL
OUTPUT
HDMI3
HDMI® cable
Side of TV
HDMI® cable
connector
HDMI®
jack
On your TV
Computer