73
5.4.5 TA5711 SETTINGS
Some parameter for Power amplier chip (5711 or 5707).
5.5 PANEL
5.6 DEBUG
Uart Enable: Uart debug switch. For software designer only
VIF:
Erase MAC: erase mac address
Erase HDCP Key: erase HDCP key
Erase HDCP2.2 Key: erase HDCP2.2 key
Erase CIplus Key: erase CIplus key
Erase ADC:
Erase WB:
Era & Gen NandBin: erase all the key
Format USB:
Print to USB: print info to USB switch
Erase Data Area: erase Data Area
Picture 19 TA5711 settings
Picture 20 Panel cong.
Picture 21 Debug page
To Next Page
Loading...
