Sharp LC-55N7000U User Manual

10
STEP3.Establishanetworkconnection
1.Press the button on the remote control and then press
>
to enter the Settings menu
.
2.Select
Network
→
NetworkConguration
.
TV JACK
Modem Cable LAN CableLAN Cable
External Modem
(ADSL / VDSL / Cable TV)
IP Sharer (Router)
(with DHCP server)
LAN
Establishawirednetworkconnection
AutomaticallyobtainanIPaddress
1.Select
Ethernet
. The TV will automatically obtain an IP address and connect to the network.
NOTE:ThedefaultoptionofIPSettingModeisDHCP.
2.If the connection fails then "
Disconnected
" will display for the Ethernet status. Retry or select
Manual
to input the information again.
ManuallyentertheIPaddress
1.Select
Manual
.
2.Enter the IP Address, Subnet Mask, Default Gateway, Preferred DNS and Alternative DNS in the menu. Next, select
Connect
.

Sharp LC-55N7000U Specifications

General

Screen Type	led
Tuner	digital
Screen Size	54.6 inches, 55 inches
Motion Enhancement	aquomotion 120
HDR	yes
HDR Format	hdr 10
Built-In Speakers	yes
Speakers Output	20 watts
Number Of Speakers	2
USB Ports	3
RF Antenna	yes
Network	built-in wi-fi, ethernet
Headphones Output	yes
Digital Optical Audio Outputs	1
Analog Audio Outputs	0
Component Video Inputs	0
Composite Video Inputs	1
DVI	0
Remote Control	standard
3D	no
Power Consumption	167 kilowatt hours
Depth with Stand	9.2 inches
Height with Stand	30.4 inches
Width with Stand	48.8 inches
Depth without Stand	2.5 inches
Height without Stand	28.3 inches
Net Weight without Stand	36.2 pounds