Sharp LC-60LE600U - Page 23

LC-60/70LE600U
4 – 11
4. Removing of 70” LCD Panel Module Unit, LCD CONTROL Unit, MAIN Unit, POWER/DRIVER Unit.
1. Remove the 24 Hooks and detach the 70” LCD Panel Module Unit .
2. Remove the 2 Connecting Cords , 4 lock screws and detach the LCD CONTROL Unit .
3. Remove the 2 look screws and detach the 2 Spacers .
4. Remove the 6 lock screws and detach the POWER/DRIVER Unit .
5. Remove the 4 lock screws and detach the MAIN Unit and Terminal Angle side .
6. Remove the 2 lock screws and detach the Eath Angle .
7. Remove the 12 lock screws and detach the 2 Stand Fix Angle Ass’y .
8. Remove the 16 lock screws and detach the 4 VESA Angle Ass’y .
䎔䎚
䎔䎛
䎔䎚
䎔䎚
䎔䎚
䎔䎛
䎜
䎛
䎔䎙
䎔䎘
䎘
䎗
䎔䎘
䎔䎙
䎕
䎶䏗䏄䏑䏇䎃䎩䏌䏛䎃䎤䏑䏊䏏䏈
䎃䎤䏖䏖䎊䏜
䎯䎦䎧䎃䎦䎲䎱䎷䎵䎲䎯䎃䎸䏑䏌䏗
䎦䏒䏑䏑䏈䏗䏌䏑䏊䎃䎦䏒䏕䏇
䎹䎨䎶䎤䎃䎤䏑䏊䏏䏈
䎃䎤䏖䏖䏃䏜
䎹䎨䎶䎤䎃䎤䏑䏊䏏䏈䎃䎤䏖䏖䏃䏜
䎹䎨䎶䎤䎃䎤䏑䏊䏏䏈䎃䎤䏖䏖䏃䏜
䎳䎲䎺䎨䎵䎒䎧䎵䎬䎹䎨䎵
䎃䎸䏑䏌䏗
䎚䎓䎅䎯䎦䎧䎃䎳䏄䏑䏈䏏䎃䎰䏒䏇䏘䏏䏈䎃䎸䏑䏌䏗
䎔
䎫䏒䏒䏎
䎫䏒䏒䏎
䎫䏒䏒䏎
䎹䎨䎶䎤䎃
䎤䏑䏊䏏䏈
䎤䏖䏖䏃䏜
䎫䏒䏒䏎
䎙
䎚
䎙
䎚
䎔䎛
䎔䎛
䎶䏓䏄䏆䏈䏕
䎶䏓䏄䏆䏈䏕
䎶䏗䏄䏑䏇䎃䎩䏌䏛䎃䎤䏑䏊䏏䏈䎃䎤䏖䏖䎊䏜
14
Terminal Angle Side
11
Eath Angle
10
12
13
12
MAIN Unit