56
LC-60LE651 MK2
LC-60LE652 MK2
DUNTKG221WE01 (Touch & Led Unit)
IC5100: 8-Bit Flash Microcontroller
Part number: PIC16LF1503T-I /SL
Sharp code: RH-IXD572WJZZY
http://ww1.microchip.com/downloads/en/DeviceDoc/41607A.pdf
High-Performance RISC CPU:
C Compiler Optimized Architecture
Only 49 Instructions
3.5 Kbytes Linear Program Memory
Addressing.
128 bytes Linear Data Memory Addressing
Operating Speed:
o DC – 20 MHz clock input.
o DC – 200 ns instruction cycle.
Interrupt Capability with Automatic Context
Saving.
16-Level Deep Hardware Stack with Optional
Overflow/Underflow Reset.
Direct, Indirect and Relative Addressing
modes:
o Two full 16-bit File Select Registers
(FSRs).
o FSRs can read program and data
memory.
Flexible Oscillator Structure:
16 MHz Internal Oscillator Block:
o Factory calibrated to ±1%, typical.
Software selectable frequency range from 16
MHz to 31 kHz.
31 kHz Low-Power Internal Oscillator.
Three External Clock modes up to 20 MHz.
Special Microcontroller Features:
Operating Voltage Range:
o 1.8V to 3.6V (PIC16LF1503)
o 2.3V to 5.5V (PIC16F1503)
Self-Programmable under Software Control.
Power-on Reset (POR).
Power-up Timer (PWRT).
Programmable Low-Power Brown-Out Reset
(LPBOR).
Extended Watchdog Timer (WDT):
o Programmable period from 1 ms to
256s.
• Programmable Code Protection
• In-Circuit Serial Programming™ (ICSP™) via
Two Pins.
Enhanced Low-Voltage Programming (LVP).
Power-Saving Sleep mode:
o Low-Power Sleep mode.
o Low-Power BOR (LPBOR).
Integrated Temperature Indicator.
Low-Power Features (PIC16LF1503):
Standby Current:
o 20 nA @ 1.8V, typical.
Watchdog Timer Current:
o 300 nA @ 1.8V, typical
Operating Current:
o 30 uA/MHz @ 1.8V, typical
Peripheral Features:
Analog-to-Digital Converter (ADC):
o 10-bit resolution.
o 8 external channels.
o 2 internal channels:
Fixed Voltage Reference and
DAC channels.
Temperature Indicator
channel.
o Auto acquisition capability.
o Conversion available during Sleep.
2 Comparators:
o Rail-to-rail inputs.
o Power mode control.
o Software controllable hysteresis.
Voltage Reference module:
o Fixed Voltage Reference (FVR) with
1.024V, 2.048V and 4.096V output
levels.
o 1 rail-to-rail resistive 5-bit DAC with
positive reference selection.
12 I/O Pins (1 Input-only Pin):
o High current sink/source 25 mA/25
mA.
o Individually programmable weak pull-
ups.
o Individually programmable interrupt-
on-change (IOC) pins.
Timer0: 8-Bit Timer/Counter with 8-Bit
Programmable Prescaler.
Enhanced Timer1:
o 16-bit timer/counter with prescaler.
o External Gate Input mode.
Timer2: 8-Bit Timer/Counter with 8-Bit Period
Register, Prescaler and Postscaler.
Four 10-bit PWM modules.
Master Synchronous Serial Port (MSSP) with
SPI and I2C™ with:
o 7-bit address masking.
o SMBus/PMBus™ compatibility.
2 Configurable Logic Cell (CLC) modules:
o 16 selectable input source signals.
o Four inputs per module.
MAJOR ICs INFORMATION ( continued )
To Next Page
Loading...
Need help?
General