42
LC-60LE651 MK2
LC-60LE652 MK2
SOFTWARE UPGRADING
It is possible to update the software on your SHARP TV.
1 Add the binary file to USB memory root.
2 Insert the memory in any USB side TV set
socket.
3 Press @ button.
4 With Ż/Ź select Setup and press OK.
5 Select Control ĺ Software ĺ Software
Update ĺ Via USB.
Software update via USB
The next screen will appear:
The software version that is currently installed is
displayed.
6 Press
V button to proceed. The TV searches for
a new software file on the USB stick.
If a new software version is available after the
search, a message appears:
New software Vx.xx
7 Press
V button to start loading the new software.
Or press END to end the wizard (the software will
not be updated).
•The updated percentage appears.
8 To make your TV completely ready for use again,
please switch it off and on with the mains switch.
If an Internet connection is available, new software can
be downloaded directly and installed in the TV set.
1 Press @ button.
2 With Ż/Ź select Setup and press OK.
3 Select Control → Software → Software
Update → Via Internet.
A message regarding data protection will be
displayed.
4 If you do not agree with data protection message,
please press
G to exit. If you agree, please press
V to continue.
The version of the software that is currently installed
will be displayed.
5 By pressing
V the TV connects to the Internet
and scans the update server for new software.
If a new software version is available, a message
appears.
6 Press
V to start loading the new software.
If you want to end the wizard, please press END.
7 To make your TV completely ready for use again,
please switch it off and on with the mains switch.
NOTES
• Please do not switch off the TV by the mains switch
during software updating.
• The total programming process can take up to 50 minutes
in total.
Software update via Internet
To Next Page
Loading...
Need help?
General