EasyManua.ls Logo

Sharp LC-60LE960X - Replacing the Battery

Sharp LC-60LE960X
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
78
Enjoying 3D image viewing
Replacing the Battery
The battery has an expected service life of approximately
75 hours.
When replacing the button battery, use only the designated
battery (Maxell branded CR2025 lithium button battery).
1 Use the tip of a ballpoint pen or similar object to
press in on the lock.
2 While pressing in on the lock, place your fingertip
in the groove and pull out the battery holder.
Pull the battery holder all the way out.
3 Replace the battery.
1
Use the tip of a ballpoint pen or similar object to
remove the battery.
2
Insert a new battery.
Insert the battery with the negative side (-) facing up.
4 Align the battery holder with the battery slot on the
3D glasses and slide it back into place.
Press it in until it locks.
NOTE
Take care not to reverse the battery poles (+) and (-) when
loading the battery.
Used batteries should be disposed of strictly in accordance
with the applicable local laws and regulations.
LC80LE960X_EN_book.indb 78LC80LE960X_EN_book.indb 78 4/4/2014 1:08:29 PM4/4/2014 1:08:29 PM

Table of Contents

Related product manuals