Sharp LL-S201A - Overlay mode; Starting overlay mode; Exiting the software; When there is no data which is being edited and is not saved

4
E
Supplied Components
Binding Cables
If any component should be missing, please contact your dealer.

Liquid Crystal Display Monitor: 1

Power cord

CD-ROM (Utility Disk): 1

Setup Manual (this manual): 1

Touch pen: 1
* SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
* Keep packaging for use when transporting monitor, etc.

AC adapter: 1

USB cable (USB-microUSB Type B): 1

Stand (front, back, bottom cover, Fixing screws: 2): 1
Secure the HDMI cable, DisplayPort cable, and USB cable using the cable clamp.
1. Remove the cable clamp.
Cable clamp
2. Route the cables through the cable
restraint slot.
Cable restraint
slot
3. Push the cable clamp down into place.
Cable clamp
Caution
• When connecting cables, spread a soft cloth on a stable level surface such as a desk, and gently place the monitor on it with
the screen facing down.