17
EnglishDeutschFrançaisItalianoEspañolEnglish
Adjusting the screen display and speaker volume
Adjusting the speaker volume
Carry out the commands without the On Screen
Display (OSD) Menu displayed. If the OSD Menu is
displayed, press the MENU button (several times
may be required) and begin when the OSD Menu
has disappeared.
1. Without the OSD Menu being displayed, push the
or the button.
VOLUME
BRIGHT
11
31
SELECT [ SELECT ]
2.Check that "VOLUME" is selected.
If it is not selected, press the SELECT button and
select "VOLUME".
3. Adjust by pressing the button (decrease) or
button (increase).
Notes:
- On Screen display for adjustment disappears
several seconds after the last operation.
To Next Page
Loading...
Need help?
General
