MD-E9000H
– 20 –
8. TUNER test
Set TUNER PRESET MEMORY according to below condition for each destination.
Condition
Function : TUNER
Band : FM MONO
Frequency : LOW FREQUENCY
Volume : LAST MEMORY
Preset G-EQ : LAST
PRESET LIST
1 FM 87.50 MHz
2 FM 108.00 MHz
3 FM 90.00 MHz
4 FM 106.00 MHz
5 FM 98.00 MHz
6 AM 522 kHz
7 AM 1620 kHz
8 AM 603 kHz
9 AM 1404 kHz
10 AM 990 kHz
9. RDS test mode 1 (RDS Distination only)
Function: — ASPM Test mode.
— CH4~CH40 will automatically memorize FM STEREO 87.50 MHz.
— CH1~CH3 will be used for this test mode.
Input: During POWER OFF (ECO/DEMO), press TUNER + ON/STAND-BY button.
.
Operation: — POWER ON at Tuner function.
— Press ASPM button to go to ASPM TEST MODE.
— Auto Scan will start from 105.00 MHz until 108.00 MHz.
— It will show the memorized station after sean.
— The test mode will be cancelled if press OTHER KEY first, before press ASPM button.
— After cancelled the test mode, the operation become NORMAL POWER ON according to the button input.
The test mode setting when it starts.
1. Volume : LAST CONDITION
2. Preset G-EQ : LAST CONDITION
3. X-Bass : LAST CONDITION
4. Function : TUNER
5. Band : FM STEREO
6. Frequency : 106.50 MHz
To Next Page
Loading...
