– 29 –
MD-E9000H
6. TEST-PLAY mode
Step 1 Test mode STOP state [ t s m e ]
Step 2 Press the NORMAL CD MD TEST-PLAY menu [ T E S T _ P L A Y _ ]
EDIT button.
Step 3 Press the CD STOP button. ADRES setting (Target address initial value is indicated) [ A D R E S _ 0 0 3 2 ]
Press the MD PLAY button.
Step 4 Continuous playback (pit section) (Address + C1 error indication) [s c ]
Continuous playback (groove section)
(Address + C1 error indication) [a c ]
Step 5 Press the CD STOP button. (Address + ADIP error indication) [a a ]
Continuous playback (groove section)
Step 6
Press the MD STOP button
. TEST-PLAY menu [ T E S T _ P L A Y _ ]
Step No.
Setting Method
7. TEST-REC mode
Step 1 Test mode STOP state [ t s m e ]
Step 2 Press the NORMAL CD MD TEST-REC menu [ T E S T _ R E C _ _ ]
EDIT button two times.
Step 3 Press the CD STOP button. ADRES setting (indication of address initial value) [ a 0 0 3 2 _ p w ]
Step 4
Press the MD PLAY button.
Continuous recording [ a _ p w ]
Step 5
Press the MD STOP button.
TEST-REC menu [ T E S T _ R E C _ _ ]
Step No.
Setting Method
Remarks Display
Remarks
Display
(For confirmation of the playback ability at the named address.)
With recording mini disk (For confirmation of the playback ability at the named address.)
8. INNER mode
Step 1 Test mode STOP state [ t s m e ]
Step 2 Press the HIGH CD MD EDIT INNER menu [ _ _ I N N E R _ _ _ ]
button.
Step 3
Press the MD PLAY button.
INNER switch position measurement [s c ]
(SUBQ address and C1 error are also indicated.)
Step 4
Press the MD STOP button.
INNER menu [ _ _ I N N E R _ _ _ ]
Step No.
Setting Method
Remarks Display
• Whenever the NORMAL CD MD EDIT button is pressed in the address setting mode, the address changes as follows.
0 0 3 2 → 0 3 C 0 → 0 7 0 0 → 0 8 A 0 → 0 9 5 0 → 0 0 3 2 →
…………
• Whenever the NORMAL CD MD EDIT button is pressed in the address setting mode, the address changes as follows.
0 0 3 2 → 0 3 C 0 → 0 7 0 0 → 0 8 A 0 → 0 9 5 0 → 0 0 3 2 →
…………
h) REC bit setting
Step 1 Test mode STOP state [ t s m e ]
Step 2 Press the CD PLAY button eight times. [ E E P R O M_ S E T ]
Step 3 Press the MD PLAY button. [ _ _ F o c u s _ _ _ ]
Step 4 Press the CD PLAY button seven times. [ R E C b i t _ S E T ]
Step 5 Press the MD PLAY button. [ S P _ W R 5 0 _ ]
Step 6 Press the CD PLAY button. [ S P _ W R 5 6 _ ]
Step 7 Press the CD PLAY button. [ S P _ W R 4 4 _ ]
Step 8 Press the CD PLAY button. [ S P _ W R 5 3 _ ]
Step 9 Press the CD PLAY button. [ L P 2 W R 5 0 _ ]
Step 10 Press the CD PLAY button. [ L P 2 W R 5 6 _ ]
Step 11 Press the CD PLAY button. [ L P 2 W R 4 4 _ ]
Step 12 Press the CD PLAY button. [ L P 2 W R 5 3 _ ]
Step 13 Press the CD PLAY button. [ L P 4 W R 5 0 _ ]
Step 14 Press the CD PLAY button. [ L P 4 W R 5 6 _ ]
Step 15 Press the CD PLAY button. [ L P 4 W R 4 4 _ ]
Step 16 Press the CD PLAY button. [ L P 4 W R 5 3 _ ]
Step 17 Press the CD PLAY button. [ R V D _ _ _ _ _ ]
Step No.
Setting Method
Display
• : Setting value
• : Address
To Next Page
Loading...
