Sharp MD-MT866H User Manual

14
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Using with the AC Adaptor
1 Place the portable MD to the battery
charger.
2 Move the Charge/Operation switch to
operation mode.
3 Plug the AC adaptor.
Caution:
● If the Charge/Operation switch is not set to operation
mode, no operation is possible.
(See “How to use the Charge/Operation switch”, page 11)
● When the unit is not in use for extended periods, re-
move the AC adaptor from the wall socket.
● Insert the plugs firmly.
Note:
When power failure occurs whilst playing back using the
AC adaptor, disconnect the adaptor from the outlet. Other-
wise, playback may start automatically when the power
returns.
To the DC IN
5V socket
AC 230-240V
50/60Hz
Operation mode
Power Source
– Using with the AC Adaptor –

Sharp MD-MT866H Specifications

General

Brand	Sharp
Model	MD-MT866H
Category	Minidisc Recorder
Language	English