Sharp MD-MX20

24
■ APMS recording from a CD onto a MiniDisc
1 Select tracks for APMS playback (page 16).
2 Load a recordable MiniDisc.
3 Press the CD
00
00
0 MD EDIT (HIGH or NORMAL) button.
● APMS playback will start, and recording will start auto-
matically.
● Programmed tracks will be recorded in order. After the
unit has finished recording the last track, recording will
stop automatically.
Note:
● If repeat play has been set, when you press the CD 0 MD
EDIT (HIGH or NORMAL) button, the repeat mode will be
canceled automatically, and APMS recording will start.
To stop recording:
Press the MD ■ button.
● Playback and recording will stop and the track numbers
will be written on the MiniDisc.
■ To record without using One-Touch Editing
1 Load a CD and a recordable MiniDisc.
2 Press the ● REC button.
● The unit will enter the recording stand-by mode.
3 Press the CD
0606
0606
06 button.
To stop recording:
Press the MD ■ button.
● Recording will stop and the track numbers will be written
on the MiniDisc.
(Continued)
3
3
2
1
2
1
MD H
MD H
MD H
3
2