Job Log / Status Monitor Message
The requested job was interrupted due to
the following reason:
(Staple Compiler: Not empty)
(Staple: Slant staple cannot be used)
(Staple Compiler: Not empty)
(Staple Compiler: Not empty)
The requested job was cancelled due to the
following reason:
(Booklet printing: Incorrect paper size)
(Booklet printing: Incorrect type selection)
(Booklet printing: Hard disk full or memory full)
(2-sided printing: Failure)
(2-sided printing :Prohibited)
(2-sided printing: No function)
(Retention printing: Hard disk full or memory full)
(Retention printing: No of jobs exceeded the limit)
(Incorrect account number)
(Selected output tray: Prohibited)
(Retention printing: No function)
(PS is not available) Please check the print driver.
(Account code exceeded the limit)
(Selected input tray: No function)
(Selected input tray: Prohibited)
(Booklet printing: Too many pages)
(Incorrect setting parameter)
(Data format is not supported)
(Selected paper cannot be used)
(Carbon Copy: Incorrect setting parameter)
(Covers/Inserts: Incorrect setting parameter)
(Document filing: Selected folder does not exist)
(Document filing: Incorrect folder password)
(Document filing: No. of jobs exceeded the limit)
(Inserter: Incorrect output tray selection)
(Inserter: Failure) Please ask your administrator.
(Covers/Inserts: Prohibited)
(Output tray: Prohibited or failure)
(Disabling of Sharing Mode)
(Disabling of Confidential Mode)
(Disabling of Storing to the selected folder)
(Disabling of Document Filing)
(Disabling of Print Jobs other Than Hold Job)
(Disabling of Print Jobs other Than Hold Job and
Disabling of Sharing Mode)
To Next Page
Loading...
