Sharp MX-2310U

MX-3610N MX-FN17 (FINISHER) 22 – 4
10) Insert the open/close cover into the fulcrum shaft, and fix it with
the clip.
11) Attach the fulcrum cover and fix it with the screw (M3 x 6 S
tight).
12) Attach the protection sheet to the bottom of the operation
panel.
20/23cpm machine
26/31/36cpm machine
D. External fixture attachment
1) Remove the left cabinet upper rear from the left cabinet upper.
2) Attach the left cabinet upper.
3) Attach the left cabinet.
4) Attach the take-up roller and fix it with the screw (M4 x 7 S
tight).
1
2
3
1
2
Edge reference
0 - 3mm
R end reference
0 - 3mm
Edge reference
0 - 3mm
R end reference
0 - 3mm
1
2
1
2
1
2