16
SPECIFICATIONS
Printer specifications
*1 When the PS3 expansion kit is installed and the machine is used as a PostScript printer.
*2 When the XPS expansion kit is installed.
*3 Barcode font kit is required.
*4 Supported operating systems are Windows 2000 / XP / Vista.
*5 To install the XPS expansion kit, an expansion memory board is required.
Type
Built-in
Continuous printing speed
Same as continuous copying speed (When printing same document continuously on A4
(8-1/2" x 11") plain paper in non-offset mode, excluding processing time.)
Printing resolution
600 x 600 dpi / 1200 x 1200 dpi
Printer driver type
PCL5c, PCL6, PostScript 3 compatible*
1
, XPS*
2
Supported protocols
TCP/IP, IPX/SPX, NetBEUI, EtherTalk
Supported client PC
operating systems
See "VERIFYING SYSTEM REQUIREMENTS" in the Software Setup Guide.
Fonts
PCL5c, PCL6 80 European fonts, 28 barcode fonts*
3
, 1 bitmap font
PostScript 3 compatible*
1
136 European fonts
Interface port
LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T
USB connectivity: Supports USB 2.0 (Hi speed)*
4
Memory
Standard system memory: 512 MB
Expansion memory: 1 GB*
5
Print area
Entire page excluding margin of 4.2 mm (11/64") at each edge. The actual print area may vary
depending on the printer driver and the software application.
To Next Page
Loading...
Need help?
General
