Sharp MX-2640N

SHARP
MAINTENANCE
17
300/360K MAINTENANCE SCHEDULE (CONT’D):
MX2640N
MX3140N
MX3640N
Description
Every
300K
Every
300K
Every
360K
Fuser Section:
In addition to Total/Colour/Fuser/Transfer maintenance if indicated:-
Replace Fusing Belt Kit (MX-361FB)
 Fusing Belt
 Meandering Suppress Collar x 2
Replace Pressure Roller Kit (MX-230LH)
 Pressure Roller
 Fusing Roller
Check & Clean Upper and Lower Thermistors.
Check/Clean/Replace Fuser Separator Pawls.
Sim 24-04 Clear Fusing Belt Counter.
Clear Fusing Roller Counter.
Clear Press Roller Counter.
Clear Fusing Load Counter.
Clear Separation Pawl Counter.
Clear Separation Plate Counter.
Clear Fusing Web Counter.
Transfer Section:
Replace Secondary Transfer Belt Kit (MX-230B2).
Sim 24-04 Clear TC2 Belt Counter.