MX-5111N MX-PNX6A/B/C/D (PUNCH MODULE) 16 – 6
7) By using nippers, split the removed connector cover of the fin-
isher along the perforated line.
8) Install the connector cover of the finisher and fix it with the fix-
ing screw.
H. Connection of connector to the main unit
1) Connect two connectors of the finisher to the main unit, and
tighten the screws.
I. Punch position label attachment
1) Attach the punch position label (Packed items of the MX-FN11)
to the position indicated in the figure.
For scanner
For DSPF/RSPF
J. Turn on the power of the main unit
1) Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
DSPF
RSPF
R2.5 connection line
Edge line R 2.5
CAUTION
Cleaning of the document scan section
When streaks appear on copy or scan
images, open the automatic document
feed unit and clean the document scan
section with the glass cleaner (accessory).
Document scan section
To Next Page
Loading...
