MX-5111N MX-DE15/DE16 (STAND/1x500/2x500 SHEET PAPER DRAWER) 4 – 1
MX-5111N
Service Manual
[4] MX-DE15/DE16 (STAND/1x500/2x500 SHEET PAPER DRAWER)
1. Unpacking
A. Removal of the desk unit
B. Removal of the fixing material and packing
parts
* If the connector is removed first, it may be pinched in the install-
ing procedures. Therefore, keep it packed when unpacking the
package, and unpack it when connecting the connector to the
machine.
C. Packed items check
2. Installation
NOTE: Before installation, be sure to turn both the operation and
main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
A. Installation of the adjuster
1) Install the right adjuster (Packed items) to the desk unit.
2) Turn each adjuster to fix the desk unit.
No. Name Quantity
1 Right adjuster 1
2 Fixing screws (M4 x 8) 4
To Next Page
Loading...
