MX-5111N MX-FX11 (FACSIMILE EXPANSION KIT) 20 – 3
H. Line cable connection
1) Connect the line cable (Packed items) on the line to the modu-
lar jack indicated as “LINE.”
MEMO: When connecting the line cable (to LINE or TEL), wind the
line cable two turns around the ferrite core (Packed items) as
shown in the figure, and connect to the modular jack which is
marked with “LINE.”
MEMO: After connection, perform the setting of “External tele-
phone connection" of the system setting (administrator).
To Next Page
Loading...
