MX-5111N IC card reader 32 – 1
MX-5111N
Service Manual
[32] IC card reader
1. Preparation
A. Supported IC card readers
B. Necessary parts
NOTE: There are two kinds of card reader holders.
Choose the suitable one according to the card reader to be
installed.
2. Installation
NOTE: Before installation, be sure to turn both the operation and
main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
A. External fixture removal
1) Remove the front cabinet upper.
2) Remove the operation panel cover.
3) Remove the operation panel upper cover.
No. Type of card readers Manufacturer Model Name
1 Non-contact IC card
reader
RFIDeas RDR-6081AKU
2 Equitrac Y591-EHID-201 v01
3ElatecTWN3
4 RFIDeas RDR-7582AKU
No. Parts code Parts name Price rank Q’ty
1 LHLDZ2230FCZZ IC Card reader holder B AX 1
2 LHLDZ2231FCZZ IC card reader holder C AX 1
3 PTPE-0352FCZZ Card reader fixing tape
(Double-stick tape)
AP 2
4 DHAI-4709FCPZ USB mini harness-AR BP 1
5 LBNDJ0013FCZ1 Binding band AE 2
6 XEBS730P08000 Screw (M3 x 8 P tight) AC 3
Parts code Parts name Supported IC card
LHLDZ2230FCZZ IC card reader holder B Y591-EHID-201 v01
LHLDZ2231FCZZ IC card reader holder C RDR-6081AKU, TWN3,
RDR-7582AKU
To Next Page
Loading...
