MX-5111N Dehumidifying heater 3 – 8
2) Attach the caution label (package part No. 26) to the desk
frame.
NOTE: Wipe the surface where the label is to be affixed with alco-
hol, then attach the label along the mark.
3) Secure the earth wire of the desk heater harness (package
part No. 27) to the desk frame with the screw (M4x8 K) (pack-
age part No. 28).
NOTE: When installing, put the direction of the earth wire terminal
within the reference range.
4) Attach the mini clamp (package part No.29).
Attach the snap band of the desk heater harness to the desk
frame, and connect the desk heater harness to the harness of
the desk heater.
(4) Installation of the tray, the desk rear cabinet and
the rear cover of the main unit
1) Install the desk rear cabinet to the desk heater tray that pulled
out, and secure it with the screw.
NOTE: Put out the desk heater harness from the notch part of the
desk rear cabinet.
2) Connect the desk heater harness to the main unit.
3) Split the main unit rear cover along the perforated line, then
attach it to the main unit, and secure it with the screw.
To Next Page
Loading...
