MX-5111N MX-DS15 (STAND) 5 – 2
B. Main unit and machine stand installation
1) Remove the connection plate covers of the both sides of the
main unit.
2) Put the main unit on the desk unit.
* Use man power of four persons or more to lift the main unit.
* Place the main unit on the machine stand slowly by fitting
the external lines. Check to insure that the positioning pin
on the top of the machine stand is securely engaged in the
positioning groove of the main unit.
3) Open the front door of the machine stand.
Unfasten the fixed screw and lift the connection plates on the
right and left sides of the front side of the machine stand, and
fix them with the fixing screws included in the package.
1
2
2
1
: '11/Jul/25
To Next Page
Loading...
