Sharp MX-4110N

MX-5111N MX-FNX9 (FINISHER) 9 – 3
7) Install the front slide rail (A) (Packed items) with the three fix-
ing screws (Packed items), and install the left front cover (B)
(Packed items) with one fixing screw (Packed items).
8) Fix the dummy punch unit (Packed items) with the fixing screw
(Packed items).
9) Check to insure that the slide roller is in the rail groove, and
insert the inner finisher.
10) Fix the rear slide rail with the fixing screw (Packed items).
11) After pushing the intermediate rail of accuride, insert the fin-
isher slide stopper (Packed items) between the rear slide rail
and the accuride.
Fix it with the coin screw (Packed items).
12) Install the front open/close cover (Packed items) to the front
rail stay rotating shaft, and fix it with the resin clip (Packed
items).
13) Fix the punch cover (Packed items) together with the band
(metal fixture) with the fixing screw (Packed items).
14) Install the front cabinet upper with two screws.
A
B
1
2
1
2