Sharp MX-4500N

32
ADDING INSERTS WHEN PRINTING ON
TRANSPARENCY FILM (Transparency Inserts)
When printing on transparency film, this function helps
prevent the sheets of transparency film from sticking
together by inserting a sheet of paper between each
sheet of film. It is also possible to print the same content
on each inserted sheet of paper as is printed on the
corresponding sheet of transparency film.
Selecting the settings:
C
B
A
The settings are on
the [Paper] tab.
Select [Transparency
Inserts] and click the
[Settings] button.
Select the transparency film settings.
To print the same content on the insert as is
printed on the sheet of transparency film, select
the [Printed] checkbox . Select the paper
selection setting as needed.
When [Bypass Tray] is selected in "Paper
Source", be sure to select the "Paper
Type".