Sharp MX-6240N

18
SCAN
File Format
This function sets the le format and compression mode (ratio) of send data.
File format Compression mode Number of pages setting
Color/Grayscale B/W Color/Grayscale B/W Color/Grayscale/Black & white
Transmittable formats:
TIFF, XPS, JPEG, PDF, PDF/A
Transmittable formats:
TIFF, XPS, PDF, PDF/A
Compressible modes:
Low, Medium, High, Bk Letter Emphasis
Compressible modes:
None, MH (G3), MMR
(G4)
Specify the number
of pages per le
Creates an
encrypted PDF
le
Creates an
encrypted PDF
le
Sends data by reducing
its size
Displays the number
of pages per le
Sends data by reducing
its size but without
reducing the image
quality
Increases or
decreases the
number of pages per
le
Others
Tap this to switch the job build mode on or off.
Setting it to On scans a large number of originals
in segments.
Scans a thin original Scans originals of different sizes together
Tap this to switch the original count setting on or
off.
Setting it to On checks the scanned number of
original sheets.
Specify the edge erase (center erase) and erase
width of the original to be sent
Scans an original as two separate pages
Sends a pamphlet original by splitting it by page Sends both sides of a card as a single page
Automatically performs transmission or polling
reception at the specied time
Stamps scanned originals Scans originals by suppressing light background area
Erases blank pages mixed in an original after
scanning
Removes chromatic colors from the scanned
original before transmission
Adjust the sharpness of an image to produce a
sharper or softer image.
Adding contrast to the scanned original before
transmission.
Saves the send data on the hard disk drive of
the machine.
Temporarily saves the send data on the hard disk
drive of the machine