Sharp MX-6240N

23
COPY OUTPUT
Saddle Stitch
(When a saddle nisher is installed)
Copies can be folded at the center, stapled, and output.
(When a trimming module is installed on the saddle nisher)
For saddle folding, it trims a side drop, offering a good-looking output
image.
Tap this to switch the cover setting Off or On, or to
congure the paper tray settings.
Scans 1-Sided originals
Releases saddle stitch 1 staple in front
This selects left binding
2 Staples
This selects right binding
Copies can be folded at the center, stapled, and
output.
This function is only available when a saddle
nisher is installed.
Scanning 2-Sided originals
Trimmer Setting
(When a trimming module is installed on the saddle nisher)
Enabling "Saddle Stitch" allows you to congure the trimmer
settings.
Turns off the trimmer setting
Turns on the trimmer setting
Specify the trimming width
within the range of 2.0 to
20.0 mm
Punch function
(When a punch module is installed)
This function punches copies and outputs them. It is available for paper sizes B5R to A3.
Punches holes during output
Folding function
(When a saddle nisher or folding unit is installed)
Copies can be folded and output.
Selects saddle fold
Selects Z-fold
Selects C-fold
Selects according fold
Selects double fold
Selects half fold
Detail setting screen for each folding type
Folds paper so that the print side faces downward
during output
Select the size of paper to be folded with
Z-fold
(One of either 11 x 17, 8-1/2 x 14, 8-1/2 x
11R, A3, B4 and A4R can be selected)
Folds paper so that the print side faces upward
during output
Select this option to fold multiple sheets together Folds paper for left binding during output
Displays a folding image Folds paper for right binding during output