9
Do not install the machine in a location with poor air circulation.
A small amount of ozone is created inside the machine during printing. The amount
of ozone created is not sufcient to be harmful; however, an unpleasant odor may be
noticed during large copy runs, and thus the machine should be installed in a room
with a ventilation fan or windows that provide sufcient air circulation. (The odor may
occasionally cause headaches.)
Locations exposed to direct sunlight
Plastic parts may become deformed and dirty output may result.
Locations with ammonia gas
Installing the machine next to a diazo copy machine may cause dirty output.
Locations subject to vibration.
Vibration may cause failure.
WARNING
Do not install the machine on an unstable or slanted surface. Install the machine
on a surface that can withstand the weight of the machine.
Risk of injury due to the machine falling or toppling.
Be sure to connect the power cord only to a power outlet that meets the specied
voltage and current requirements. Also make certain the outlet is properly
grounded. Do not use an extension cord or adapter to connect other devices
to the power outlet used by the machine. Using an improper power supply may
cause re or electrical shock.
* For the power supply requirements, see the name plate in the lower left corner of the
left side of the machine.
Near a wall
Be sure to leave the clearances shown right between the unit
and the nearest wall or other surface.
For easy maintenance, you should also leave the clearances
shown right around the unit.
Locations that are excessively hot, cold, humid, or dry. (near heaters, humidiers,
air conditioners, etc.)
The paper will become damp and condensation may form inside the machine, causing
misfeeds and dirty output.
30cm
30cm
45cm
Installation notes
CAUTION
The machine includes a built-in hard drive. Do not subject the machine to shock or
vibration. In particular, never move the machine while the power is on.
• The machine should be installed near an accessible power outlet for easy connection.
• Connect the machine to a power outlet which is not used for other electric appliances. If a lighting
xture is connected to the same outlet, the light may icker.
CAUTIONS
To Next Page
Loading...
