Sharp MX-7580N - Common Settings

8-27
SYSTEM SETTINGS►SETTING MODE LIST
Common Settings
U: General user; A: System administrator/Administrator
Setup Items Factory default setting U A
● Common Settings (page 8-121)
X Paper Settings Yes Yes
 Paper Tray Settings Yes Yes
• Auto Switching of Tray Enabled Yes Yes
• Display Paper Tray Settings when bypass tray
detects paper.
Enabled Yes Yes
• Tray 1 Plain Paper 1, 8-1/2" x 11" (A4) Yes Yes
• Tray 2 Plain Paper 1, 8-1/2" x 11" (A4) Yes Yes
• Tray 3 Plain Paper 1, Auto-Inch (Auto-AB) Yes Yes
• Tray 4 Plain Paper 1, Auto-Inch (Auto-AB) Yes Yes
•Tray 5*
1, 2, 3
Plain Paper 1, 8-1/2" x 11" (A4)*
1
Plain Paper 1, 11" x 17" (A3)*
2
Plain Paper 1, Auto-Inch
(Auto-AB)*
3
Yes Yes
•Tray 6*
3
Plain Paper 1, Auto-Inch (Auto-AB) Yes Yes
• Bypass Tray Plain Paper 1, Auto-Inch (Auto-AB) Yes Yes
• Inserter (Upper) Plain Paper 1, Auto-Inch (Auto-AB) Yes Yes
• Inserter (Lower) Plain Paper 1, Auto-Inch (Auto-AB) Yes Yes
 Custom Size Registration (Bypass) Custom 1 to 7
Size Input-Inch
X=17" (420mm) Y=11" (297mm)
Yes Yes
 Paper Type Registration – Yes Yes
X Operation Settings No Yes
 Condition Settings No Yes
• Enlarge Display Mode Disabled No Yes
• Message Time Setting 6 sec. No Yes
• Language Setting American English No Yes
• Default Display Setting Home Screen No Yes
• Display Favorite Menus as Default Disabled No Yes
• Display Action Panel as default. Enabled No Yes
• Icon is displayed when network cable is not
connected.
Enabled
No Yes
• Display Confirmation Dialog when job is canceled. Disabled No Yes
• Switch the Number of Sets to be Displayed for Job
Status
Progress
No Yes
• Display the estimated job start time Enabled No Yes
• Alignment Order of 10-Key Ascending order from upper left No Yes