PRINT IMAGE QUALITY
Check Image Quality (Print Mode) – Density.
Sim 64-05 PCL Density Test Page.
Sim 64-06 PS Density Test Page.
PERIPHERAL / OPTION CONFIGURATION
FINISHER – MX-FN12
Sim 26-65 Finisher Alarm Mode:
Limit number of Copies in staple mode (ON/OFF).
EXTERNAL ACCOUNTING MODULE – MX-AMX3
Sim 55-03 Auto clear function before Copy job execution:-
SSW 1-5 0 = Disable, 1 = Enable
Sim 55-03 Continuous print mode (job queuing for OSA):-
SSW 24-7 0 = Disable, 1 = Enable
PRINTER DATA BACKUP
Sim 22-06 Data Simulation Print.
Device Clone & Storage Backup
Sim 56-01 Backup EEPROM Data to HDD
To Next Page
Loading...
