Sharp MX-B382 - Trouble Codes

TROUBLE CODES
SHARP
38
A0
01
PCU ROM abnormality
02
SCU/OPU ROM abnormality
10
MFP PWB ROM error
11
I/F version discrepancy (MFP-PCU)
12
I/F version discrepancy (MFP-SCU)
20
Machine level error (MFP detection)
21
Machine level error (PCU detection)
22
Machine level error (SCU detection)
C1
10
Main charger trouble
C4
00
PTC trouble
CE
MX-B382 only:-
00
Network communication error
01
Network card is not installed or defective
02
FTP or Mail server is not found
03
Specified server does not correspond
04
Invalid account/password (FTP server)
05
Invalid directory entered (FTP server)
06
Specified mail server (POP3) is not found
07
Invalid server account or password
08
The specified mail server (POP3)
suspends response
E7
01
MFP image data trouble.
03
HDD trouble.
04
HDD-ASIC trouble
05
Local memory access trouble.
06
Image data decode error.
08
MFP memory specification error.
09
Standard memory combination error.
10
Shading trouble (Black correction)
[MX-B382 only].
11
Shading trouble (White correction)
[MX-B382 only].
14
CCD-ASIC communication error
[MX-B382 only]
20
LSU laser detection error
21
LSU LD deterioration trouble
28
LSU-PCU connection trouble
E7
29
LSU-ASIC frequency abnormality.
50
Engine connection trouble.
55
PWB information SUM error.
60
MFP combination error (Firmware/PWB)
61
MFP-PCU combination error
65
MFP EEPROM sum check error
80
MFP-SCN communication trouble.
90
MFP-PCU communication trouble.
EE
EC
Auto DV adjustment trouble.
EL
Auto DV adjustment trouble (over
toned).
EU
Auto DV adjustment trouble (under
toned).
F1
00
Finisher-PCU PWB communication error.
03
Finisher exit roller lift operation trouble.
10
Finisher staple operation trouble.
15
Finisher exit tray lift operation trouble.
19
Finisher alignment operation trouble F.
20
Finisher alignment operation trouble R
21
Finisher interface fan motor trouble.
29
Finisher PWB fan trouble
37
Finisher data backup RAM error.
50
Finisher incompatibility trouble.
F2
11
DV unit initial detection trouble
15
Drum unit initial detection trouble
19
Primary transfer initial detection trouble
21
2
nd
transfer initial detection trouble
22
Discharge lamp trouble
26
Auto toner density level trouble
39
Process Thermistor breakdown
40
Toner density sensor trouble
45
Secondary transfer separation trouble
49
LSU thermistor trouble
50
Drum phase sensor trouble
58
Humidity sensor trouble (process)
64
Toner supply error
70
Improper toner cartridge detection
74
Toner cartridge CRUM error
78
Image density registration sensor trouble