Sharp MX-B382 - Density & Gradation Adjustment

SHARP
DENSITY & GRADATION ADJUSTMENT
13
MX-B382 - Manual Density & Gradation Adjustment – SERVICE MODE
HIGH DENSITY PROCESS CONTROL:
[Execute]
Sim 44-06
HALF TONE IMAGE CORRECTION
[Execute]
Sim 44-26
HALF TONE ADJUSTMENT:
Sim 46-74 [for Engine & Printer]
SERVICE MODE
Place printed test pattern onto glass for both Copy &
Printer modes.
MANUAL DENSITY ADJUSTMENT:
Sim 46-21 [for Engine]
Sim 67-25 [for Printer]
Adjust points A to Q for Copy & Printer Modes..
PRINTER DENSITY CHECK:
Sim 64-05 [PCL Printer]
Sim 64-06 [PS Printer]