Sharp MX-B382 - Page 22

FIRMWARE UPGRADE
SHARP
22
For MX-B382P Printer Only:
 To browse the required folder containing the MX-B382P firmware file, enter the
folder number and press the shortcut key on the operation panel.
Example shown:- Folder <DIR> FIRMWARE = 01.
 Select the MX-B382P firmware file by entering the file number and press the shortcut key
on the operation panel.
Example shown:- Filename rom.sfu = 01.
 To select individual areas only (eg ICU Main & ICU Boot), enter the relevant firmware
number and press the shortcut key Each item selected will now be
highlighted.
Example shown ICU Main (01) and ICU BootM (02).