Network (Web Page)
1. Open a web browser and enter the following URL :-
http://ipaddress/service_login.html or
http://ipaddress/service_account.html
Example: http://192.168.0.182/service_login.html
Note: If User Authentication (username & password) is enabled, open the device
webpage and “login” using the service username and password (as below):-
2. Enter the “Service” Username and Password to access the Service Webpage and click Login:-
Default Username: service
Password: service
3. When the service webpage opens, click Update of Firmware.
To Next Page
Loading...
