Job Log / Status Monitor Message
The requested job was interrupted due to
the following reason:
The requested job was interrupted due to
the following reason:
(Staple: Change paper size)
(Selected input tray: No function)
(Selected input tray: Prohibited)
(Selected output tray: Failure)
(Selected output tray: Full of paper)
(Selected output tray: Prohibited or failure)
(Selected output tray: No function)
(Manual-feed printing) Insert paper in Bypass tray
(Printer error) Please ask your administrator.
(Account code exceeded the limit)
(Selected paper cannot be used)
(Document filing: Incorrect folder password)
(Number of allowed pages exceeded the limit)
(Print quality: Conflict of setting parameter)
(Staple Compiler: Not empty)
(Staple: Slant staple cannot be used)
(Staple Compiler: Not empty)
(Staple Compiler: Not empty)
(2-sided printing: Failure)
(2-sided printing :Prohibited)
(2-sided printing: No function)
(Retention printing: Hard disk full or memory full)
(Retention printing: No of jobs exceeded the limit)
(Incorrect account number)
(Selected output tray: Prohibited)
(Retention printing: No function)
(PS is not available) Please check the print driver.
(Account code exceeded the limit)
(Selected input tray: No function)
To Next Page
Loading...
